Technical Analysis for CMT - Core Molding Technologies Inc
| ADX | Long Term | Intermediate Term | Short Term |
|---|---|---|---|
| Weak or Absent | Down | Down | Down |
| Date | Alert Name | Type | % Chg |
|---|---|---|---|
| Fell Below 20 DMA | Bearish | 1.07% | |
| 20 DMA Support | Bullish | -0.43% | |
| Crossed Above 20 DMA | Bullish | -1.72% | |
| Inside Day | Range Contraction | -1.72% | |
| Fell Below 20 DMA | Bearish | -0.50% | |
| 180 Bearish Setup | Bearish Swing Setup | -0.50% | |
| Gapped Down | Weakness | -0.50% | |
| Inside Day | Range Contraction | -4.24% | |
| 50 DMA Resistance | Bearish | -2.32% | |
| Gapped Up | Strength | -2.32% |
| Alert | Time |
|---|---|
| Possible NR7 | 39 minutes ago |
| Possible Inside Day | 39 minutes ago |
| 20 DMA Resistance | about 3 hours ago |
| Rose Above 20 DMA | about 4 hours ago |
| 60 Minute Opening Range Breakout | about 4 hours ago |
Get this analysis on your stocks daily!
- Earnings date: 11/05/2024
Core Molding Technologies Inc Description
Core Molding Technologies, Inc., together with its subsidiaries, manufactures sheet molding compounds (SMC), and molds fiberglass reinforced plastics. The company specializes in large-format moldings and offers a range of fiberglass processes, including SMC and glass mat thermoplastics to manufacture compression-molded products; bulk molding compounds; and spray-up, hand lay-up, and resin transfer molding products. It also offers reaction injection molding products. Core Molding Technologies, Inc. sells its products for various markets, including medium and heavy-duty truck, marine, automotive, agriculture, construction, and other commercial products in the United States, Canada, and Mexico. The company was formerly known as Core Materials Corporation and changed its name to Core Molding Technologies, Inc. in August 2002. Core Molding Technologies, Inc. was founded in 1988 and is headquartered in Columbus, Ohio.
Classification
Sector: Consumer Cyclical
Industry: Rubber & Plastics
Keywords: Plastic Thermoplastic Fiberglass Core Molding Technologies
| Indicator | Bull Case | Neutral / Hold | Bear Case |
|---|---|---|---|
| 50 DMA | |||
| 200 DMA | |||
| ADX Trend | |||
| Oversold / Overbought | |||
| Relative Strength |
| Indicator | Value |
|---|---|
| 52 Week High | 21.0 |
| 52 Week Low | 14.64 |
| Average Volume | 34,356 |
| 200-Day Moving Average | 17.65 |
| 50-Day Moving Average | 16.76 |
| 20-Day Moving Average | 16.08 |
| 10-Day Moving Average | 16.52 |
| Average True Range | 0.56 |
| RSI (14) | 44.13 |
| ADX | 18.2 |
| +DI | 16.30 |
| -DI | 22.77 |
| Chandelier Exit (Long, 3 ATRs) | 15.82 |
| Chandelier Exit (Short, 3 ATRs) | 16.72 |
| Upper Bollinger Bands | 17.36 |
| Lower Bollinger Band | 14.81 |
| Percent B (%b) | 0.41 |
| BandWidth | 15.86 |
| MACD Line | -0.10 |
| MACD Signal Line | -0.11 |
| MACD Histogram | 0.0092 |
| Pivot Point Level | Traditional / Classic | Fibonacci | Demark | Woodie | Camarilla |
|---|---|---|---|---|---|
| Resistance 4 (R4) | 16.43 | ||||
| Resistance 3 (R3) | 16.48 | 16.33 | 16.34 | ||
| Resistance 2 (R2) | 16.33 | 16.19 | 16.31 | 16.30 | |
| Resistance 1 (R1) | 16.10 | 16.10 | 16.03 | 16.05 | 16.27 |
| Pivot Point | 15.95 | 15.95 | 15.92 | 15.93 | 15.95 |
| Support 1 (S1) | 15.72 | 15.81 | 15.65 | 15.67 | 15.45 |
| Support 2 (S2) | 15.57 | 15.72 | 15.55 | 15.42 | |
| Support 3 (S3) | 15.34 | 15.57 | 15.39 | ||
| Support 4 (S4) | 15.29 |
